Corotech Coatings have been developed from systems derived from over 100 years of coatings technology. Corotech Coatings offer a variety of coatings and coatings systems for all industrial, maintenance and commercial applications. From 100% solids flooring epoxy systems to direct to metal enamels, Corotech Coatings will deliver lasting protection and performance for any environment. Corotech Coatings are designed to offer state of the art performance and corrosion protection with unique products and technologies. Many of the Corotech products are MPI Approved products and qualify for Leed Credits in building construction.

At Day’s we stock a wide range of the Corotech coatings, and have a NACE trained product specialist to assist you with the product specification process. Corotech is a Benjamin Moore Company.

Corotech Epoxies

Epoxy Mastic Coating V160

Epoxy Mastic Coating is a high solids, surface tolerant epoxy mastic for professional use in industrial and commercial applications. Excellent for use on ferrous and non-ferrous metals, and when properly top-coated, exhibits excellent chemical and moisture resistance. Resists solvents, dilute acids and alkali attack.

High Solids and High Build
Surface tolerant mastic for marginal substrates
Hard scratch and impact resistant coating
Excellent for secondary containment
Qualifies for LEEDS credits
This product has been approved by CFIA (Canadian Food Inspection Agency) for use in Food Processing Facilities.

For Technical information, TDS, MSDS click here

Polyamide Epoxy V400

Polyamide Epoxy is designed for use in food and beverage processing, industrial maintenance, general metal finishing and fabrication, chemical processing, industrial and commercial flooring and other areas requiring maximum impact and abrasion resistance.

High Solids and High Build
Surface tolerant for marginal substrates
Hard scratch and impact resistant coating
Excellent for masonry and ferrous metals
This product has been approved by CFIA (Canadian Food Inspection Agency) for use in Food Processing Facilities.

For Technical information, TDS, MSDS click here

Fast Dry Polyamide Epoxy V410

Fast Dry Polyamide Epoxy is a unique satin sheen epoxy that cures fully in 24 hours at 25 °C (77 °F). In addition, this product cures in temperatures as low as 0 °C (32 °F) in approximately 5 days. Fast Dry Polyamide Epoxy may be used as a high durability floor finish that can be put into service 24 hours after coating application when applied at 25 °C (77 °F).

Fast cure and low temp applications
Excellent for all metal and masonry surfaces
Excellent acid and chemical resistance
Hard, scratch and impact resistant coating
This product has been approved by CFIA (Canadian Food Inspection Agency) for use in Food Processing Facilities.

For Technical information, TDS, MSDS click here

100% Solids Epoxy Coating V430

100% Solids Epoxy is a two-component, high-build epoxy. It is formulated for use as a one-coat application on interior concrete floors subjected to industrial chemicals and fumes. This product can also be used in severe exposure applications subjected to heavy abrasion and vehicular traffic.

100% solids formulation for maximum build
Extreme abrasion resistance
Chemical and fume resistant
High service life in warehouse and commercial environments
Qualifies for LEEDS credits
This product has been approved by CFIA (Canadian Food Inspection Agency) for use in Food Processing Facilities.

For Technical information, TDS, MSDS click here

Waterborne Amine Epoxy V440

Waterborne Amine Epoxy is formulated to provide superior chemical, abrasion and impact resistance. The highly cross-linked film provides years of service in industrial and commercial applications and is particularly suited for use on concrete floors subjected to severe service conditions.

Low odour and Low VOC for occupied areas
Excellent abrasion and chemical resistance
Easy application and clean-up
Hard, scratch and impact resistant coating
This product has been approved by CFIA (Canadian Food Inspection Agency) for use in Food Processing Facilities.

For Technical information, TDS, MSDS click here

Acrylic Epoxy V450

Acrylic Epoxy is a two-component epoxy that offers unique features such as low odour and application over slightly damp surfaces. For use on properly prepared interior & exterior ferrous metal, galvanized metal, wood, plaster, masonry and drywall surfaces that are subject to moderate abrasion or mild chemical exposures.

Low odour and Low VOC for occupied areas
Excellent abrasion and chemical resistance
Easy application and clean-up
Hard, scratch and impact resistant coating
This product has been approved by CFIA (Canadian Food Inspection Agency) for use in Food Processing Facilities.

For Technical information, TDS, MSDS click here

Go to top